Cortelco Telephone 2194V0E27S User Manual

Owner’s  
Instruction Manual  
2194**V0E27S  
PATRIOT II  
MEMORY TELEPHONE  
 
Important Safety Instructions  
Always follow basic safety precautions when using your  
telephone equipment to reduce the risk of fire, electrical shock,  
and injury.  
1. Read and understand all instructions in the Owner’s  
Instruction Manual.  
2. Read all warnings and follow all instructions marked on the  
product.  
3. Unplug this product from the wall outlet before cleaning.  
Use a damp cloth for cleaning. Do not use liquid or aerosol  
cleaners.  
4. Do not use the telephone near water. For example, do  
not use near a bathtub, wash bowl, kitchen sink, laundry tub,  
swimming pool, or in a wet basement.  
5. Do not place this product on an unstable cart or stand.  
The product may fall causing serious damage to the product.  
6. Do not place any objects on the telephone line cord. Do  
not locate the telephone where the line cord will be walked on.  
7. Do not block or cover ventilation slots and openings in  
the bottom of the telephone. The openings should never be  
blocked by placing the telephone on a bed, sofa, rug, or other  
similar surfaces. This telephone should never be placed near  
or over a radiator or heat register. This telephone should never  
be placed in a built-in installation unless proper ventilation is  
provided.  
8. Never spill liquid on the telephone or push objects of  
any kind through ventilation slots. Liquid or objects may  
touch dangerous voltage points or short out parts that could  
result in a risk of fire or electrical shock.  
9. Do not disassemble this product. Opening or removing  
covers may expose you to dangerous voltages or other riskes.  
Incorrect reassemble can cause electrical shock when the  
product is subsequently used.  
10. Avoid using a telephone during a local thunderstorm.  
There may be a remote risk of electrical shock from lightning.  
Download from Www.Somanuals.com3. All Manuals Search And Download.  
11.Do not use a telephone in the vicinity  
of a gas leak to report the leak, or otherwise.  
12.Unplug the telephone from the wall  
outlet and refer servicing to qualified service person  
nel under the following conditions:  
•When the line cord is frayed or plugs damaged.  
•If liquid has been spilled into the telephone.  
•If the telephone has been exposed to rain or water.  
•If the telephone does not operate properly by followi  
ng the operating instructions.  
•If the telephone has been dropped or the housing  
damaged.  
•If the telephone exhibits distinct change in  
performance.  
SAVE THESE INSTRUCTIONS  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
Warning: Changes or modifications to this unit not  
expressly  
approved  
by  
the  
party  
responsible  
for  
compliance could void the user’s authority to operate the equipment.  
NOTE: This equipment has been tested and found to comply with the  
limits for a CLASS B digital device,pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in  
a
residential installation. This equipment  
generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
-
-
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
-
-
Connect the equipment into an outlet on  
different from that to which the receiver is connected.  
a
circuit  
Consult the dealer or an experienced radio TV  
technician for help.  
Download from Www.Somanuals.com4. All Manuals Search And Download.  
BEFORE USING YOUR TELEPHONE  
1. Set the ringer volume control. If the control is set  
to OFF, you will not hear the ringer when someone  
calls you.  
2. Your telephone has a TONE-PULSE switch. Set  
the switch to match the dialing service from the tele  
phone company.  
If you have pulse service, set the Tone-Pulse  
switch to PULSE.  
If you set the switch for TONE service, you must  
have TONE service or you cannot dial.  
If you set the switch for PULSE service and you  
haveTONE service, you can dial numbers, but you  
cannot use distant services, such as bank-by-  
phone, unless you press the TONE button.  
USING YOUR TELEPHONE  
TO PUT A CALL ON LOCAL HOLD  
While on a call, press the HOLD button, the LED lights and the call  
is on local hold. Place the handset on hook, the HOLD indicator  
remains on while the call is on local hold.  
To return to the call on hold:  
Lift the handset or if the handset is off-hook, press the HOLD  
button, the LED will go off and the call is no longer on hold.  
TO STORE NUMBERS:  
Lift the handset, you will receivedialtone. PresstheSTORE button  
and dial the number (15 digits maximum). If desired press the  
PAUSE button to insert a two-second pause in the number sequence.  
Then press the STORE button again and press desired memory  
location button and place the handset on-hook, or press the STORE  
button to continue storing numbers. Use the shift button to store in  
two-touch memory locations.  
TO DIAL STORED NUMBER:  
To dial the stored numbers in the 10 one-touch memory locations:  
1. Lift the handset.  
2. Press memory location button  
MAINTENANCE INFORMATION  
Treat your telephone with care for trouble-free  
performance. Avoid dropping the handset. Carefully place  
the handset on-hook after use.  
Clean your telephone with a damp cloth. Stains  
may be removed with a mild soap. Do not use liquid or  
aerosol detergents or cleaning agents.  
 
5
FEATURES OF YOUR TELEPHONE  
HEARING-AID COMPATIBLE HANDSET The handset on  
your Patriot II telephone works with magnetically-coupled  
hearing aids.  
PUSHBUTTON DIAL. The pushbutton dial is used to dial  
numbers using either pulse or tone dialing  
TELEPHONE LINE CORD JACK Connect the modular line  
cord supplied with your telephone at this jack. Use long cord  
for desk installation, short cord for wall installation.  
DATA PORT Data Port is a connection which is in parallel  
with the telephone line. This allows the connection of a  
device such as a modem, or an answering machine.  
MESSAGE WAITING INDICATOR The Message Waiting  
Indicator will light when a message is waiting. This switch  
allows the phone to be configured for 90V-message waiting  
either on T/R (tip/ring, the red/green wires) or Y/B (the  
yellow/black wires).  
If this switch is in the T/R Position then the lamp also serves  
as visual ring indication.  
MEMORY LOCATIONS One-Touch locations are used to  
store and retrieve numbers for automatic dialing. Each  
location can store 15 digits, including numbers and pauses.  
 
6
FEATURES OF YOUR TELEPHONE  
TONE/PULSE SWITCH The TONE/PULSE switch, located on the  
side of your telephone, is used to set the type of dialing for your  
telephone to match the local service from your telephone company.  
The ‘P’ position is for Pulse dialing service. The ‘T’ position is for  
Tone dialing.  
RINGER VOLUME CONTROL The 3-position switch (located on the  
side of the telephone) is used to set ringer volume.  
HANDSET VOLUME CONTROL The 3-position switch (located on  
the side of the telephone) is used to set the handset volume.  
STORE BUTTON The STORE Button is used to store numbers in  
memory locations for automatic dialing. You can store a maximum of  
10 one-touch numbers with 15 digits maximum. To store a number  
lift the andset, press the STORE button and dial numbers (15 digits  
maximum), press the STORE button again and press the desired  
memory location button. Place the handset on-hook, or press the  
STORE button to continue storing numbers.  
REDIAL BUTTON Your Patriot II telephone stores in memory the last  
nubmer dialed (31 digits maixmum). You can redial the last nubmer  
dialed by lifting the handset and pressing the RD/P button. This  
button must be the first button pressed after lifting the handset to  
activate the redial feature. You can erase the number stored in redial  
memory by lifting the handset and dialing any digit.  
PAUSE BUTTON The PAUSE button can be used to program pauses  
in your memory locations.  
FLASH BUTTON The FLASH button sends an interrrupt signal to the  
distant office. The interrupt is a 600-millisecond, timed line  
disconnect which tells the distant office that you wish to use an  
available feature. The results of a FLASH signal will depend on the  
services you have available. DIP switch selection located on the  
bottom of the phone allows for flash setting of 300 msec. or 600  
msec.  
HOLD BUTTON To place a call on local hold, press this button and  
return the handset to tht ecreadle (the hold LED will light). To  
retrieve the call lift the handset or, if the handset if off-hook, press the  
hold button.  
DIP SWITCH The DIP switch located on the bottom of the phone  
priveds for:  
a) Flash timing selection of 300 or 600 msec  
b) Positive line disconnect option selection.  
c) Pause time selection for 2 or 3.6 seconds.  
d) A-Lead feature.  
 
7
TELEPHONE SERVICE PROBLEMS  
If you have any problems with your telephone service, de-  
termine if the problem is with your telephone or the telephone com-  
pany lines. BEFORE CALLING THE TELEPHONE COMPANY, be  
aware that they may charge you for a service call if the problem is  
caused by your telephone.  
NO DIAL TONE  
Unplug your telephone from the wall jack. Plug a substitute  
telephone that is known to work properly into the same wall jack.  
•If the problem persists when using the substitute telephone,  
notify the telephone company.  
•If the substitute telephone works properly, you must have your  
telephone repaired before reconnecting it to the wall jack.  
DIAL TONE BUT NO RINGING  
•Check that the RINGER VOLUME CONTROLis not set to OFF.  
•Set the RINGER VOLUME CONTROL to HIGH and have  
someone on another line call you. Before answering the call set  
the RINGER VOLUME CONTROL to the desired volume.  
DIAL TONE BUT NO DIALING  
•Set the TONE/PULSE switch. You cannot dial out in TONE  
position if you have Rotary Dial Service.  
•For Rotary Dial Service, set the switch to PULSE position.  
•For Tone Dial Service, set the switch to TONE position.  
•Try both positions if you are not sure.  
REPAIR OF YOUR TELEPHONE  
DO NOT ATTEMPT TO REPAIR THE TELEPHONE YOURSELF.  
Telephones manufactured by Cortelco must be returned to us for repair.  
You can return your telephone to Cortelco for repair or replace-  
ment in accordance with our LIMITED WARRANTY.  
DATE-OF-PURCHASE Cortelco warrants telephones against de-  
fects in material and workmanship in accordance with our LIMITED WAR-  
RANTY. If your telephone is returned for repair, include a copy of your sales  
receipt containing the date-of-purchase. DO NOT INCLUDE THE ORIGINAL  
SALES RECEIPT.  
If date-of-purchase is not included, the factory date printed on the  
label on the bottom of your telephone will be used as the date-of-purchase.  
The factory date allows six months for distribution and sale of the telephone.  
If you return your telephone for repair, the warranty period is not  
extended. The original date-of-purchase continues to apply to your warranty.  
OUT-OF-WARRANTY REPAIR We will repair this telephone for a  
nominal fee after the LIMITED WARRANTY has expired if you send it to us in  
a complete and undamaged condition. The repaired telephone will be shipped  
to you C.O.D., freight collect.  
FOREIGN ATTACHMENTS Remove all attached devices, such as  
adapter plugs or long cords, from your telephone before returning for repair.  
We do not assume responsibility for repair or return of attachments. Check  
our LIMITED WARRANTY.  
RETURN-FOR-REPAIR PACKAGING If you are returning a tele-  
phone to us for repair, package it carefully, preferably in the original carton.  
Be sure to include your return address, a copy of the sales receipt showing  
date-of-purchase, and a note describing the problem you have with your tele-  
phone. Shipping must be prepaid. If the telephone is in warranty, it will be  
repaired or replaced, at our option, at no cost to you, and it will be returned  
shipping prepaid.  
Ship telephones (shipping prepaid) to:  
Cortelco - REPAIR CENTER  
1703 SAWYER ROAD  
CORINTH, MS 38834  
 
8
INSTALLING YOUR TELEPHONE  
UNPACKING YOUR TELEPHONE  
Check the contents of the carton. Make sure you have a  
telephone, a baseplate, a 8-foot handset cord, a long modular line  
cord, and a short modular line cord.  
If anything is missing or damaged, contact the place of  
purchase.  
MODULAR JACKS  
To install your telephone, you must have a modular wall  
jack at the desired location, or a 4-prong jack that can be modified  
with a 4-prong adapter. If your telephone line does not have a  
modular wall jack, or a jack that can be modified, you must have one  
installed.  
DANGER: To reduce the risk of electrical shock and  
personal injury, observe the followingwhen installing  
station wiring:  
1.Never install telephone wiring during a light-  
ning storm.  
2.Never install telephone jacks in wet locations  
unless the jack is specifically designed for wet  
locations.  
3.Never touch uninsulated telephone wires or  
terminals unless the telephone line has been  
disconnected at the network interface.  
4.Use caution when installing or modifying  
telephone lines.  
Various types of  
modular wall jacks are  
shown to the right. The  
USOC RJ11C modular wall  
jack is for desk telephones and  
the USOC RJ11W modular wall  
jack is for modular wall  
telephones.  
Various types of 4-  
prong wall jacks are shown to  
the right along with a 4-prong  
adapter. The 4-prong adapter  
plugs into the wall jack for  
modular wall jack service.  
 
9
INSTALLING YOUR TELEPHONE  
DESK INSTALLATION  
To install as a desk telephone, refer to the diagram.  
Insert the baseplate mounting  
posts into the mounting holes and  
locking slot on the housing.  
Connect the line cord into the  
jack on the back of the phone.  
Plug the line cord into the  
jack and route the free end down  
through the channel to the baseplate.  
Plug the unattached end of the  
line cord into the modular wall jack.  
WALL INSTALLATION  
To install a wall telephone, refer to the diagram.  
Insert the baseplate  
mounting posts and latch into the  
mounting holes and locking slot.  
Plug the line cord into  
the wallplate.  
Slip the eyelets of the  
baseplate down onto the wallplate  
posts in a downward direction.  
Adjust the wall mount  
clip, located on the face of the  
housing, by lifting up the clip and  
rotating it 180 degrees.  
Complete the Desk/Wall mounting by installing the handset  
and handset cord.  
CHECK FOR DIAL TONE  
Lift the handset and listen for dial tone.  
1) When you hear dial tone, your telephone is ready to use.  
2) If you do not hear dial tone, refer to the Telephone Service  
Problems part of your manual.  
Download from Www.Somanuals.co1m0. All Manuals Search And Download.  
THE FCC WANTS YOU TO  
KNOW  
DESIGN COMPLIANCE Your telephone is designed to  
comply with FCC Rules and Regulations, Part 68. It can be con-  
nected to the telephone network as FCC-registered terminal equip-  
ment. The registration number is printed on the label on the bottom  
of your telephone.  
NOTIFICATION TO THE TELEPHONE COMPANY  
As a customer of the local telephone company, you must, if they ask,  
tell them before connecting your telephone to the telephone com-  
pany lines. The telephone company may need the FCC registration  
number and the ringer equivalence of the telephone. This informa-  
tion is printed on a label on the bottom of your telephone.  
RINGER EQUIVALENCE The ringer equivalence indi-  
cates the amount of power that your telephone draws from the tele-  
phone company line during ringing. The number is printed on the  
label on the bottom of your telephone.  
If you have more than one telephone (or other terminal de-  
vice) connected to the telephone company line, you should total the  
ringer equivalence numbers (REN’s), and be sure that the total is not  
more than five. Your telephones may not ring if the total is more than  
five.Also, in some rural locations, your telephone may not ring if the  
REN total is more than three.  
RESTRICTIONS You must not connect your telephone to  
coin-operated lines or party lines.  
INTERFERENCE POTENTIAL Your telephone has a  
pushbutton dial that generates radio frequency energy. If not prop-  
erly used, it may interfere with radio and television reception. If the  
telephone does cause interference with reception, move the radio or  
television to another electrical circuit or another location. If neces-  
sary, you may need to seek advice from an experienced technician.  
INSTALLATION This model telephone must be connected  
to the telephone company lines through a modular jack. The required  
USOC for the modular jack is RJ11C for desk mounting and RJ11W  
for wall mounting. The USOC number is printed on the label on the  
bottom of your telephone.  
TYPE OF DIALING Your telephone has a TONE/PULSE  
switch that allows Tone or Pulse dialing. To use TONE dialing, you  
must have TONE service from your telephone company to use your  
telephone for dialing. Note that you will usually be charged extra for  
TONE service.  
HEARING-AID COMPATIBILITY The handset on your  
telephone will work with magnetically-coupled hearing aids. You can  
use a hearing aid equipped with a T (Telephone) switch.  
IN CASE OF TROUBLE If your telephone should cause  
problems on the telephone line, the telephone company can tempo-  
rarily disconnect your service. The telephone company must then  
notify and allow you to correct the problem.  
The telephone company may from time to time change its  
lines or equipment. They must notify you if planned changes will  
affect your telephone service, to allow you to take steps to prevent  
interruptions.  
Download from Www.Somanuals.com11. All Manuals Search And Download.  
LIMITED WARRANTY  
If you purchased this product new in the U.S. or Puerto  
Rico, CORTELCO warrants it against defects in material  
and workmanship for a period of one (1) year from the  
date of original purchase. This warranty is in lieu of all  
other express warranties. During the warranty period,  
CORTELCO agrees to repair or, at its option, replace the  
defective product, or any part of it without charge for parts  
or labor. This is your exclusive remedy. This warranty does  
not cover damage resulting from accident, misuse, abuse,  
improper installation or operation, lack of reasonable care,  
the affixing of any attachment not provided by CORTELCO  
with the product and loss of parts. The warranty is voided  
in the event any unauthorized person alters or repairs the  
unit.  
Telephone companies use different types of equipment and  
offer various types of services to customers. CORTELCO  
does not warrant that this product is compatible with  
the type of equipment of any particular phone com-  
pany or the services provided by it.  
CORTELCO DISCLAIMS ANY IMPLIED WARRANTY,  
INCLUDING THE WARRANTY OF MERCHANTABILITY  
AND THE WARRANTY OF FITNESS FOR A PARTICU-  
LAR PURPOSE, AS OF THE DATE ONE YEAR FROM  
THE ORIGINAL PURCHASE OF THE PRODUCT.  
CORTELCOASSUMES NO RESPONSIBILITY FORANY  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAM-  
AGES.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS,AND YOU MAY HAVE OTHER RIGHTS WHICH  
VARY FROM STATE TO STATE. SOME STATES DO NOT  
ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR  
LIMITATIONS ON HOW LONGAN IMPLIED WARRANTY  
LASTS, SO THE ABOVE EXCLUSION AND LIMITATION  
MAY NOT APPLY TO YOU.  
If failure occurs and your telephone is in warranty, service  
shall be provided by returning it to CORTELCO - Repair  
Center, 1703 Sawyer Road, Corinth, Mississippi 38834,  
shipping prepaid. The product will be repaired or replaced  
if examination by us determines the product to be defec-  
tive. Telephones received damaged as a result of ship-  
ping will require you to file a claim with the carrier.  
PATRIOT II MEMORY Rev0805  
Download from Www.Somanuals.co1m2. All Manuals Search And Download.  

Cisco Systems Network Router 12000 GSR User Manual
Coleman Camping Equipment 2000001107 User Manual
Compaq Network Card EV67 User Manual
Craftsman Lawn Mower 29137619 User Manual
Cuisinart Frozen Dessert Maker ICE 25 User Manual
Delta Electronics Network Card SPBD 155E4J1R User Manual
Elation Professional Fan X Fogger User Manual
Fisher Price Satellite Radio T4840 User Manual
GE Double Oven JHC56G User Manual
GE Monogram Refrigerator ZDBI240 User Manual